Sistem Rancang Bangun Alat Pemberi Pakan Otomatis Pada Ayam Petelur Berbasis IoT Menggunakan Node MCU

Authors

  • Muchammad Lukman Fauszan Universitas PGRI Adi Buana Surabaya
  • Mochamad Choirul Fu’ad Universitas PGRI Adi Buana Surabaya
  • Akhmad Solikin Universitas PGRI Adi Buana Surabaya

Keywords:

Breeder, Node MCU, RTC, Servo Motor, IoT

Abstract

For breeders who own a large number of chickens, it becomes a difficult task to keep them fed around the clock. Generally, farmers sprinkle feed on the feed ticket using their hands and walk along the cage, where the laying hens are very spacious. Such activities for chicken farmers will take time and energy. Such activities for chicken farmers will take time and energy. The main controller of this system uses the MCU Node which is connected to an RTC (Real Time Clock) to adjust the feeding time of chickens in real time. This automatic tool has two parts, namely the main container serves as a place to store food reserves, equipped with a servo motor that functions to open the valve so that the feed can come out to the feed in the cage.

 

Author Biographies

Muchammad Lukman Fauszan, Universitas PGRI Adi Buana Surabaya

 

 

Mochamad Choirul Fu’ad, Universitas PGRI Adi Buana Surabaya

 

 

Akhmad Solikin, Universitas PGRI Adi Buana Surabaya

 

 

References

N. Yorino, A. Priyadi, H. Kakui, and M. Takeshita, “A new method for obtaining critical clearing time for transient stability,” IEEE Trans. Power Syst., vol. 25, no. 3, pp. 1620–1626, 2010.

M. Ali, F. Hunaini, I. Robandi, and N. Sutantra, “Optimization of active steering control on vehicle with steer by wire system using Imperialist Competitive Algorithm (ICA),” in 2015 3rd International Conference on Information and Communication Technology (ICoICT), IEEE Conferences, 2015, pp. 500–503.

D. H. Kusuma, M. Ali, and N. Sutantra, “The comparison of optimization for active steering control on vehicle using PID controller based on artificial intelligence techniques,” in 2016 International Seminar on Application for Technology of Information and Communication (ISemantic), IEEE Conferences, 2016, pp. 18–22.

R. Alterovitz, T. Simeon, and K. Goldberg, “The Stochastic Motion Roadmap: A Sampling Framework for Planning with Markov Motion Uncertainty,” in Robotics: Science and Systems III, 2007.

Downloads

Published

2022-12-22

How to Cite

Muchammad Lukman Fauszan, Mochamad Choirul Fu’ad, & Akhmad Solikin. (2022). Sistem Rancang Bangun Alat Pemberi Pakan Otomatis Pada Ayam Petelur Berbasis IoT Menggunakan Node MCU. SinarFe7, 5(1), 85–89. Retrieved from http://journal.fortei7.org/index.php/sinarFe7/article/view/365

Issue

Vol. 5 No. 1 (2022): SinarFe7-5 2022

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.