Rancang Bangun Pengupas Kelapa Muda Berbasis Progam Logic Controller and Human Marchine Interface
DOI:
https://doi.org/10.56795/fortech.v2i2.201Keywords:
Prototype, Coconut, PLC, HMI, Variable speedAbstract
In general, the design of the young coconut peeler machine is to use an induction motor that still uses a manual system to turn the tool on and off, so it is not efficient in the production process of peeling young coconut. The speed of the induction motor can be adjusted by changing the frequency, therefore a Variable Speed Drive (VSD) is needed which aims to regulate the rotational speed of the induction motor. As the controller of the Variable Speed Drive (VSD), the compiler uses a Programmable Logic Controller (PLC). From the description of the background above, a young coconut peeler based on PLC and HMI was designed. This system uses PLC control as a control for variations in the rotation speed of the motor, so that the rotation of the induction motor can be controlled as needed, in this tool an HMI system is applied which functions as an interface display from the operator to the peeler. In this study using 4 stages, namely (1) a needs survey, (2) designing (3) prototypes, (4) testing prototypes. In the trial results, the simulation of the coconut peeler design went well by using low, medium, high speed variations using the human marchine interface as the display of the variable speed button, while the PLC as the control machine.)
References
T. Damari Bayu Wicaksono, A. D. Eko Purkuncoro Program Studi Teknik Mesin, and J. K. Raya Karanglo, “Perencanaan Transmisi Mesin Kupas Kelapa Muda Berkarakter,” 2019.
R. A. Rangkuti, A. Atmam, and E. Zondra, “Studi Pengaturan Kecepatan Motor Induksi Tiga Phasa Menggunakan Variable Speed Drive (VSD) Berbasis Programmable Logic Controller (PLC),” J. Tek., vol. 14, no. 1, pp. 121–128, 2020, doi: 10.31849/teknik.v14i1.2295.
M. Ali and M. Ulum, “Perbandingan Optimasi Kontroler Putaran Motor Permanent Magnet Syschronous Machine,” J. FORTECH, vol. 1, no. 1, pp. 12–19, Feb. 2020, doi: 10.32492/fortech.v1i1.218.
A. Priyadi, A. Riambodo, T. Puspita Sari, and S. Soedibyo, “Pengaruh Penambahan SCES Terhadap Peningkatan Kestabilan Transien Menggunakan Metode Critical Trajectory Berbasis Losing Synchronism,” J. FORTECH, vol. 1, no. 1, pp. 7–12, Feb. 2020, doi: 10.32492/fortech.v1i1.216.
Kadaryono, Rukslin, M. Ali, Askan, A. Parwanti, and I. Cahyono, “Comparison of LFC Optimization on Micro-hydro using PID, CES, and SMES based Firefly Algorithm,” in 2018 5th International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), Oct. 2018, pp. 204–209. doi: 10.1109/EECSI.2018.8752733.
Wahyu S J Saputra and Faisal Muttaqin, “Pemantauan Suhu Air Pada Sistem Tanaman Hidroponik Menggunakan Sensor DS18B20 Waterproof,” J. JEETech, vol. 2, no. 2, pp. 60–64, Oct. 2021, doi: 10.48056/jeetech.v2i2.165.
M. Ali, F. Hunaini, and G. Y. Hartlambang, “Optimisasi Kontrol Kemudi Mobil Listrik Menggunakan Metode Adaptive Neuro-Fuzzy Inference System (ANFIS),” Intake J. Penelit. Ilmu Tek. Dan Terap., vol. 6, no. 2, pp. 16–34, 2015.
F. T. Nugroho, S. Nisworo, and A. Trihasto, “Sistem Kendali Otomatis Fire Sprinkler Berbasis Programmable Logic Controller ( Plc ),” pp. 2–5, 2021.
M. Ali, R. Rukslin, H. Nurohmah, Y. Arie Pambayun, and A. Zaini, “Rekonfigurasi Jaringan Distribusi Radial Di Penyulang Purwoasri Berbasis Modified Imperialist Competitive Algorithms (MICA),” J. FORTECH, vol. 1, no. 2, pp. 74–78, Aug. 2020, doi: 10.32492/fortech.v1i2.227.
F. Andi Pratama, M. Ulum, and R. Alfita, “Smart LCD Proyektor Balancing Berbasis Android,” J. FORTECH, vol. 1, no. 2, pp. 68–73, Aug. 2020, doi: 10.32492/fortech.v1i2.226.
H. Haryanto and S. Hidayat, “Perancangan HMI (Human Machine Interface) Untuk Pengendalian Kecepatan Motor DC,” Setrum Sist. Kendali-Tenaga-elektronika-telekomunikasi-komputer, vol. 1, no. 2, p. 58, 2016, doi: 10.36055/setrum.v1i2.476.