Rancang Bangun Mesin Pengering Ikan Memanfaatkan Sirkulasi Udara Panas Bagi Nelayan Desa Lekok Pasuruan
DOI:
https://doi.org/10.56795/fortech.v2i2.202Keywords:
Fish, Fisherman, Blower heat, Drying machine, Rotary systemAbstract
The Indonesian region, which has a tropical climate and has a wide sea, is one of the factors that make the population a fisherman. Fishermen from Pasuruan Regency, especially Lekok Village, are one of the producers of high quality marine products so that production reaches foreign exports. This study aims to develop the productivity of marine products in Lekok District, Pasuruan Regency which is constrained by the process of drying fish. Using research methods of literature and empirical studies, an automatic fish drying machine is designed by utilizing a hot air blower which is controlled by a thermistor and accompanied by a rotating system so that the results resemble manual drying using solar radiation. From the results of data analysis and system testing, it shows that the quality of fish that is dried with a rotary system is more effective than drying machines in general, such as the rack type because the results of drying fish are more even. The test results for the drying process require a temperature setting of 45-50 degrees within 220 minutes to reach a moisture content of 0.38% with a drying machine capacity of 32.5 kilograms.
References
Herlina,Ninuk. 2019. Hubungan Curah Hujan dengan Produktivitas Apel (Malus sylvestris Mill.) di Kabupaten Pasuruan, Jawa Timur (7-12). Malang: Universitas Brawijaya.
Soyan,Nurfadila.2016. Rancang bangun alat pengering ikan teri tipe rak dengan pemnafaatan kolektor surya (13-15). Makasar: Universitas islam negeri Alauddin.
M. Ali and M. Ulum, “Perbandingan Optimasi Kontroler Putaran Motor Permanent Magnet Syschronous Machine,” J. FORTECH, vol. 1, no. 1, pp. 12–19, Feb. 2020, doi: 10.32492/fortech.v1i1.218.
A. Priyadi, A. Riambodo, T. Puspita Sari, and S. Soedibyo, “Pengaruh Penambahan SCES Terhadap Peningkatan Kestabilan Transien Menggunakan Metode Critical Trajectory Berbasis Losing Synchronism,” J. FORTECH, vol. 1, no. 1, pp. 7–12, Feb. 2020, doi: 10.32492/fortech.v1i1.216.
H. Abdillah, A. N. Afandi, A. Qurrata Ayun, and S. Ari wibowo, “Kendali Supply Beban Pada Sistem Pembangkit Hybrid,” J. FORTECH, vol. 1, no. 1, pp. 1–6, Feb. 2020, doi: 10.32492/fortech.v1i1.215.
Machrus Ali, Dwi Ajiatmo, and Muhlasin, “Optimasi Kualitas Tenaga Listrik Di Area Banyuwangi Menggunakan Radio Gateway Over Internet Protocol ”, jeetech, vol. 1, no. 2, pp. 70-77, Nov. 2020
S. Sendari, A. Fajar Syahputra, A. Nurutami, E. Kartika Sari, A. Agus Rahma Dani, and D. Desti Yanti, “Pemetaan Arena Kerja Menggunakan Sensor Ultrasonik Pada Robot Omnidireksional,” J. FORTECH, vol. 1, no. 1, pp. 20–27, Feb. 2020, doi: 10.32492/fortech.v1i1.219.
Fatimah,Turmuzi. 2017. The design of solar dryer using energy collectors and fans for cocoa fermentation drying.Medan: Ethos (Jurnal Penelitian dan Pengabdian Masyarakat).
Ekayana,Agung.2016. Rancang bangun alat pengering rumput laut berbasis mikrokontroler arduino uno Vol. 13, No. 1,1 - 12 . Bali: JPTK, UNDIKSHA.
Purwanto,Adom.2019. Design and Performance Hybrid Drying with Chimney Effect for Drying Arabica Beans Coffee volume 3.Bogor.Perhimpunan Teknik Pertanian Indonesia (PERTETA) bekerjasama dengan Departemen Teknik Mesin dan Biosistem, Institut Pertanian Bogor
