Analisa Harmonisa Pada Unit Crane RTG (Rubber Tyred Gantry) Di PT. Nilam Port Terminal Indonesia

Authors

  • Choirul Anam Institut Teknologi Adhi Tama Surabaya
  • Nasyith Hananur Rohiem Institut Teknologi Adhi Tama Surabaya
  • Riny Sulistyowati Institut Teknologi Adhi Tama Surabaya

DOI:

https://doi.org/10.56795/fortech.v4i1.4102

Keywords:

RTG (Rubber Tyred Gantry) Crane, Variable Speed Drive (VSD), Harmonic Distortions, Harmonic Filter

Abstract

RTG (Rubber Tyred Gantry) Crane tends to have harmonic distortions. It is caused by the VSD switching process that converts current from DC to AC, decreasing the power quality and affecting power generation. Disturbance tends to happen on voltage or a current sine wave of the system that contains multiplied frequency from fundamental frequency. It is required to analyze based on the IEEE standard of Std 519-2014 which described that the 20kV bus voltage has a limit value of 3% for VIHD and 5% for VTHD. By using available software, simulation is applied to the RTG Crane electrical system. Harmonic distortion will be discussed by gathering simulation result data in the form of the harmonic spectrum and harmonic wave. harmonic filter to be applied is an Active Filter and Passive Filter that then compared the compatibility to solve the harmonic distortion. The analysis is also applied to Power Factor (PF) value changes before and after filter installation.

 

Author Biographies

Choirul Anam, Institut Teknologi Adhi Tama Surabaya

 

 

 

Nasyith Hananur Rohiem, Institut Teknologi Adhi Tama Surabaya

 

 

 

Riny Sulistyowati, Institut Teknologi Adhi Tama Surabaya

 

 

 

References

Sugiarto,Hadi.2012.”Kajian Harmonisa Arus Dan Tegangan Listrik di Gedung Administrasi Politeknik.

Putra N P U, "Harmonic Effect for Voltage Stability Condition in Radial Distribution System", 2019 International Seminar on Intelligent Technology and Its Applications, DOI: 10.1109/ISITIA.2019.8937215

R Sulistyowati , D Widiatmoko , H A Sujono ,2021" Harmonics Analysis of Inverter Circuits on Smart Grid System, ICATECH.

Rosa, F.C.D.L. 2006 Harmonic And Ppower System. USA: Taylor & Francis Group, LLC.

Bukit, F.R.A. 2017. Analisa HarmonisapppPadakkKarakteristik Motor Induksi Tiga Phasa. Juitech / Vol.01 / No. 02 / Oktober 2017 / pISSN : 2580-40570/ e-ISSNn: 2597-7261

Budi, A.I.P, dkk. 2018. Analisis Pemasangan Filter Pasif Dan Aktif Terhadap Kandungan Harmonisa Dan Rugi-Rugi Daya Gardu Distribusi KA 2085 Di PT. PLN (Persero) Distribusi Bali Rayon Mengwi. E-Jurnal SPEKTRUM Vol. 5, No. 1 Juni 2018

Ray Ridley. (Nov. 2006). Analyzing the SEPIC converter. Power Systems Design Europe [Online]. Available:http://www.powersystemsdesign.com/design_ tips_nov06.pdf

Robert W. Erickson and Dragan Maksimovic, Fundamentals of Power Electronics, 2nd ed. (New York: Springer Science+Business Media LLC, 2001).

John Betten and Robert Kollman. (Jan. 25, 2006). No need to fear: SEPIC outperforms the flyback. Planet Analog[Online].Available:http://www.planetanalog.com/ showArticle.jhtml?articleID=177103753.

ETAP Harmonic Analysis. 2005.

Downloads

Published

2023-01-21

How to Cite

Anam, C., Hananur Rohiem, N., & Sulistyowati, R. (2023). Analisa Harmonisa Pada Unit Crane RTG (Rubber Tyred Gantry) Di PT. Nilam Port Terminal Indonesia. Jurnal FORTECH, 4(1), 7–19. https://doi.org/10.56795/fortech.v4i1.4102