Optimasi Sudut Elektroda dan Kuat Arus Terhadap Kekuatan Tarik Pada Baja ST37
DOI:
https://doi.org/10.56795/fortech.v5i1.5105Keywords:
Las SMAW, sudut elektroda, kuat arus, kekuatan tarik, baja ST37Abstract
Welding technology is an important process in the field of manufacturing in metal welding. SMAW welding uses electrical energy as a heat source and additional electrodes in joining metal welding. The angle of the electrode and the current strength greatly affect the welding strength. In this research, the design and analysis of variations in electrode angle and current strength in SMAW welding were carried out on tensile strength. The material used for testing is ST37 steel. The electrode angles used are 65o, 70o and 75o. The magnitude of the current used is 3 variations, namely 90 A, 95 A, and 100 A. In this research, the data processing method used is a factorial design with data from the results of tensile strength testing. In this study, the largest tensile strength test results were obtained at an electrode angle of 70o with a current strength of 100 A, getting a result of 32.668 kg/mm2, while the smallest result was obtained at an electrode angle of 65o with a current strength of 90 A, getting a result of 19.96 kg/mm2. The results of this research will be used as a reference for further research with variations in angle and current, using different test materials.
References
H. Ivandri, I. P. Mulyatno, and Kiryanto, “Analisis Pengaruh Variasi Sudut Kampuh Double V Pada Sambungan Las SMAW (Shield Metal Arc Welding) Baja St 37 Terhadap Kekuatan Tarik, Tekuk dan Impact,” J. Tek. Perkapalan, vol. 5, no. 4, p. 785, 2017.
Suherman, R. M. Ambarita, R. K. Simangunsong, and P. J. Simanjuntak, “Pengaruh Jenis Elektroda E6013 Pada Pengelasan SMAW Terhadap Sifat Fisis Dan Mekanis Baja SA 106 Grade B,” Conf. Pap., no. March, pp. 50–54, 2019.
A. Purwanto, W. Wijoyo, and A. Fajar Riyadin, “Pengaruh Polaritas Mesin Las pada Pengelasan SMAW (Shielded Metal Arc Welding) Terhadap Sifat Fisik dan Mekanik Baja Karbon Rendah,” J. Tek. Indones., vol. 2, no. 4, pp. 150–158, 2023, doi: 10.58860/jti.v2i4.238.
H. K. Rahman and S. Sunyoto, “Pengaruh Arus SMAW Terhadap Kekuatan Tarik dan Impak Baja Konstruksi IWF JIS G3101 SS400,” J. Din. Vokasional Tek. Mesin, vol. 6, no. 1, pp. 35–45, 2021, doi: 10.21831/dinamika.v6i1.37070.
A. Bakhori, “Analisa Variasi Arus Pengelasan Smaw Dengan Elektroda 7018 Pada Baja Karbon Aisi 1050 Terhadap Kekuatan Tarik,” Pros. Semin. Nas. Tek. UISU, vol. 6, no. 1, pp. 46–51, 2023.
S. Fauzan and Hestiawn, “Sifat Mekanik Sambungan Las Smaw Pada Baja Amutit K-460,” WR Supratman Kandang Limun, Bengkulu. Telp, vol. 460, no. 12, pp. 424–426, 2017.
S. Siswanto, L. Hakim, and A. I. Dyah, “Perbandingan Jenis Elektroda Las Terhadap Uji Tarik Material Plat ST 37,” Majamecha, vol. 4, no. 1, pp. 24–33, 2022, doi: 10.36815/majamecha.v4i1.1372.
S. T. A. Lekatompessy, “PENGARUH VARIASI PARAMETER PENGELASAN TERHADAP KUALITAS HASIL PENGELASAN,” ALE Proceeding, vol. 2, pp. 6–8, 2021, doi: 10.30598/ale.2.2019.6-8.
T. Test, T. Strenght, and L. Cell, “Analisis Pengujian Tarik ( Tensile Test ) Pada Baja St37,” Anal. Penguji. Tarik (Tensile Test) Pada Baja ST 37 Dengan Alat Bantu Ukur Load Cell, vol. 3, no. 1, pp. 9–13, 2016.
W. N. Ilahi, M. Mas’ud, and M. Huda, “PENGARUH JENIS ELEKTRODA E6013 PADA PENGELASAN SMAW TERHADAP SIFAT FISIK DAN MEKANIS BAJA KONTRUKSI JIS G3350,” J. Mech. Manuf. Technol., vol. 4, no. 2, pp. 68–76, 2023, doi: 10.35891/jmmt.v4i2.4426.
A. S. Mohruni and B. H. Kembaren, “Pengaruh Variasi Kecepatan Dan Kuat Arus Dengan Elektroda E6013,” J. Rekayasa Mesin, vol. 13, no. 1, pp. 1–8, 2013.
