Analisis Performa PV Monocrystalline dan Polycrystalline untuk Kecepatan Motor Pompa Air DC

Main Article Content

Faiz Syaikohoni Aziz
Agung Setyobudi
Ahmad Muzakki Setiawan
Sujito
Mohamad Rodhi Faiz

Abstract

Pada penelitian ini menyajikan analisis performa panel surya dengan bahan monocrystalline dan polycrystalline. PV dengan bahan monocrystalline terbuat dari kristal silikon tunggal sedangkan PV dengan bahan polycrystalline terdiri dari sejumlah kristal yang berbeda, digabungkan satu sama lain dalam satu sel tunggal. Parameter untuk mengetahui performa PV bahan bahan monocrystalline dan polycrystalline dalam menghasilkan kecepatan motor pompa air menggunakan suhu dan iradiasi yang akan di simulasikan menggunakan MATLAB Simulink. Masing-masing system diuji dengan spek pompa air yang sama dengan radiasi 1000 W/m2 dan suhu , C, C, C, C, C. Hasil dari simulasi menunjukan performa bahan monocrystalline menghasilkan arus 1.776 A– 1.789 A, tegangan 16.86 V – 16.98 V dan kecepatan motor pada pompa air yaitu 1533 rpm - 1544 rpm Sedangkan performa pada bahan polycrystalline arus yang dihasilkan yaitu 2.494 A- 2.505 A, tegangan 16.19 V-16.27 V dan kecepatan motor pada pompa air yaitu 1472 rpm-1479 rpm. Dalam aplikasi pompa air dc bahan monocrystalline lebih unggul dibanding pollycrystalline.

Article Details

How to Cite
Faiz Syaikohoni Aziz, Agung Setyobudi, Ahmad Muzakki Setiawan, Sujito, & Mohamad Rodhi Faiz. (2020). Analisis Performa PV Monocrystalline dan Polycrystalline untuk Kecepatan Motor Pompa Air DC. SinarFe7, 3(1). Retrieved from https://journal.fortei7.org/index.php/sinarFe7/article/view/267
Section
Articles

References

M. V. C. Sontake and V. R. Kalamkar, “Solar photovoltaic water pumping system - A comprehensive review,” Renew. Sustain. Energy Rev., vol. 59, no. Supplement C, pp. 1038–1067, 2016.

. Islam, M. M. Hasan Shawon, S. Akter, A. Chowdhury, S. I. Khan and M. M. Rahman, "Performance Investigation of Poly Si and Mono Si PV Modules: A Comparative Study," 2019 International Conference on Energy and Power Engineering (ICEPE), Dhaka, Bangladesh, 2019, pp. 1-5.

Hao Deng et al., "High-performance monocrystalline silicon could lead the photovoltaic power generation in the future," 2015 China Semiconductor Technology International Conference, Shanghai, 2015, pp. 1-3.

Szindler, Marek. ‘’Electrical properties mono-and polycrystalline silicon solar cells,’’ Journal of Achievements in Materials and Manufacturing engineering, vol.59. 2013.

G. Li, Y. Jin, M. W. Akram, and X. Chen, “Research and current status of the solar photovoltaic water pumping system – A review,” Renew. Sustain. Energy Rev., vol. 79, no. Supplement C, pp. 440– 458, 2017.

R. Foster, M. Ghassemi, and A. Cota, “Solar Energy,” in Renewable Energy and The Environment, M. Ghassemi, Ed. CRC Press, 2009

Application Of Rural Photovoltaic Water Pumping System Using Immersed Pump And Dc Motor

M. Abu-Aligah “Design of Photovoltaic Water Pumping System and Compare it with Diesel Powered Pump”. Jordan Journal of Mechanical and Industrial Engineering. Volume 5, Number ISSN 1995 3, June - 6665 2011, Pages 273 – 280.

Gabra, C.F. & Hossam-Eldin, A & Ali, Prof. Dr. Eng, Ahmed Hamza H. “A Comparative Analysis of the Performance of Monocrystalline, Polycrystalline and Amorphous Thin Film PV Cells in Semi-Arid Climate Conditions: the Case of Egypt,” Africa PV Solar Energy Conference and Exibition, 2014.

B. Hörömpöli and E. Rácz, "Statistical analysis of power measurements made on mono- and polycrystalline solar cells," 2018 IEEE 16th World Symposium on Applied Machine Intelligence and Informatics (SAMI), Kosice, 2018, pp. 000149-000154

Xie biaokai, Shen Hui, Zhu Weihua, The comparison of actual power generation performance for six kinds of photo voltaic solar cells arrays, Proceedings of the 10th China solar photovoltaic. 8. 2009